eSATA Extender Cable

eSATA Extender Cable
Run Up to SIX hard drives! Expand the Capabilities of Your Mac Pro
eSATA Extender Cable
– Provides ability to run external eSATA devices with your Mac Pro®
– Perfect Fit Solution® for proper and accurate routing inside case
– Enables connection of up to two* SATA-I or SATA-II devices
– eSATA Extender Cable for Mac Pro 12-Core, 8-Core, Quad-Core
Extend...Expand ...Enjoy!
Engineered to be a Perfect Fit Solution
Works with all Mac Pros versions*
  • Mac
  • eSATA interface
1 Year NewerTech Product Limited Warranty
eSATA Extender Cable

eSATA Extender Cable

The NewerTech eSATA Extender Cable lets you utilize up to two* extra SATA ports found on your Mac Pro's logic board.
eSATA Extender Cable Connections 2006-2008 Mac Pro connections shown
Perfect Fit Solution
The first Mac Pro eSATA port expansion cable to be offered was specifically and thoroughly engineered to be a Perfect Fit Solution® so it routes accurately and properly inside your Mac Pro case.
Extend...Expand ...Enjoy!
Now you can run up to two* external eSATA devices and expand your hard drive configuration up to a whopping six drives.
NOTE: Mac Pro on-board SATA connectors are not hot-swappable.

*The 2009 Mac Pro comes equipped with two SATA ports, but one port is utilized by the factory installed optical drive connector. As a result, one of the NewerTech eSATA Extender Cable connectors must be removed prior to installation.

*The 2010 Mac Pro comes equipped with two SATA ports, but one port is utilized by the factory installed optical drive connector. As a result, one of the NewerTech eSATA Extender Cable connectors must be removed prior to installation.

  • Provides ability to run external eSATA devices with your Mac Pro
  • Perfect Fit Solution® for proper and accurate routing inside case
  • Enables connection of up to two* SATA-I or SATA-II devices
  • Full color, step-by-step with photos installation manual
  • Works with all Mac Pros versions*
  • 1 Year NewerTech Product Limited Warranty Register Here
NOTE: Tools needed for installation include a Phillips P0 Screwdriver and a Phillips P00 Screwdriver. Both are available as a separate purchase in the NewerTech 11 Piece Toolkit
Learn how to find your Mac's model ID This product is compatible with...
Mac Pro
Mac Pro
(August, 2006)
Model ID: MacPro1,1
2.0GHz, 2.66GHz, 3.0GHz
Mac Pro
Mac Pro (8-core)
(April, 2007)
Model ID: MacPro2,1
3.0GHz
Mac Pro
Mac Pro (Early 2008)
(January, 2008)
Model ID: MacPro3,1
2.8GHz, 3.0GHz, 3.2GHz
Mac Pro
Mac Pro (Early 2009 8-Core)
(March, 2009)
Model ID: MacPro4,1
2.26GHz, 2.66GHz, 2.93GHz
Mac Pro
Mac Pro (Early 2009 Quad-Core)
(March, 2009)
Model ID: MacPro4,1
2.66GHz, 2.93GHz, 3.33GHz
Mac Pro
Mac Pro 8-Core
(Mid 2010-2012)
(July, 2010)
Model ID: MacPro5,1
2.4GHz
Mac Pro
Mac Pro 12-Core
(Mid 2010-2012)
(July, 2010)
Model ID: MacPro5,1
2.40GHz, 2.66GHz, 2.93GHz, 3.06GHz
Mac Pro
Mac Pro Quad-Core
(Mid 2010-2012)
(July, 2010)
Model ID: MacPro5,1
2.8GHz, 3.2GHz
*The 2009 Mac Pro comes equipped with two SATA ports, but one port is utilized by the factory installed optical drive connector. As a result, one of the NewerTech eSATA Extender Cable connectors must be removed prior to installation.

*The 2010 Mac Pro comes equipped with two SATA ports, but one port is utilized by the factory installed optical drive connector. As a result, one of the NewerTech eSATA Extender Cable connectors must be removed prior to installation.